Welcome to the Growing Community of Coverstar Automatic Pool Cover Owners
We are proud of the advanced engineering and quality construction of our systems. Please read this manual carefully to understand the features and maintenance of your new cover. Please see below for DIY cover care and contact us for an annual maintenance appointment to keep your system running smoothly.
Download copyDo It Yourself Maintenance and Care
1Cleaning the Cover
When you uncover the pool, the water in the pool is transferred from the pool to the top surface of the cover. The sun then dries it, causing high concentrations of chlorine on top of the cover that may damage the fabric. Wash the cover with a mild hand dishwashing liquid every 3-6 months to remove this accumulation. Do not use laundry detergent.
2Housing Drains
On recessed systems, frequently check the drain(s) to be certain they drain the housing completely and do not allow water to stay in the housing area. If water is allowed to stand in the mechanism area over periods of time, the system may become damaged by the constant moisture. Damage to either electrical or mechanical components resulting from standing water or extended submersion is not covered under the warranty.
3Mechanism
Clean all rotating surfaces by spraying with a hose nozzle every 3 months, or more often in sandy or windy areas.
4Housing
Clean leaves and debris from deck housing every 3-6 months, depending on foreign matter accumulation. Run the cover over the pool, prop the housing lid open or remove it, and remove the debris in the housing. Accumulated debris can hinder the proper operation of the cover.
5Rodents
In certain areas rodents may nest in the cover housing and chew on the cover and ropes. A common cause of rope breakage is rodent damage, which is not covered under the warranty. Mothballs in a perforated, tamper proof container may help keep rodents under control. Keep poisons out of reach of small children. Solar powered LED light strips in the cover housing may also discourage rodent damage.
6Water Chemistry
We suggest, as all cover manufacturers do, that you only cover pool water that you would swim in. If the water is temporarily out of balance due to chemical additives and you wouldn’t swim in it, covering the pool may damage the cover prematurely. Water that has improper chemical balance may, over the long term, severely shorten the expected life of the fabric.
Note: If the pool is left open after shocking the pool, adult supervision of an open pool should be provided.
Use a good test kit frequently to maintain proper chemical balance Premature cover deterioration that is a result of improper chemical balance is not covered under the warranty.
7Winter Use
When the time comes to close your pool down at the end of the swimming season, your cover can be used during the winter months as long you follow our Motorized Cover Winterization Policy. If you are unable to and unwilling to follow these procedures, please roll up your cover and discuss with your Pool Service Technician the best method for winterizing your pool. Also, the use of a Coverstar Mesh Safety cover will provide excellent winter safety protection for your pool, if you should decide not to use your automatic safety cover during the winter months.
8Cleaning the tracks
Once a month or as necessary clean out the tracks using your garden hose. With the automatic pool cover open, shoot a stream of water into the tracks to flush out and remove dirt and debris.
Professional Maintenance Appointments
The better care you give your pool cover system, the longer the lifespan you will enjoy. To prolong the life of your pool cover system we recommend an annual maintenance appointment. Contact us today to get one schedule and be sure to ask about maintenance plans to make sure your pool cover is operating smoothly year round.
Basic System Maintenance (includes)
- Rope Adjustment
- Lube Pulleys
- Flush Out Tracks
- Inspect Mechanism & all Wearable Items
Possible Add on
- Mechanism Housing Cleanout
Complete System Maintenance (includes all items from Basic System Maintenance plus)
- Mechanism Box Cleanout
- Pressure wash & clean cover fabric
Possible Add on
- Apply UV Protectant
ASTM F1346-91 Safety Standard
The American Society for Testing Material created a final recommendation for powered and manual safety covers in 1991 called the ASTM F1346-91 standard. Coverstar™ systems have been tested, and when used and installed according to instructions, they meet or exceed this standard.
The main provisions of ASTM F1346-91 are:
- The cover system must be labeled with warning labels. (Labels are always available either from your distributor or Coverstar if yours is illegible.)
- The cover must support 485 lbs. in a five foot radius.
- The cover must be operated from a position where the complete pool surface is visible to the operator.
- The switch must be momentary and be located at least 5′ above the surface where the operator stands, or be key operated.
- An object approximately 4.5″ in diameter should not be able to slide under the cover.
- An automatic water evacuation system (self-actuating cover pump) must be used at all times. It must be placed on the cover so that rain will automatically be removed within 1/2 hour of the cessation of rain.
You should check your installation and verify that the points above are present in your installation. If any point is not present, by definition, you do not have a safety cover.
Pool safety is a major concern of Coverstar Inc. We agree with the National Spa and Pool Institute that the first and most important component of pool safety is constant adult supervision of the pool area. There is no substitute for adult supervision.
Coverstar automatic swimming pool cover systems come with industry-leading warranties, ensuring peace of mind and long-lasting performance for your pool cover. Our warranties include exclusive features like HEAT SEALED Webbing and POWERFLEX™ Rope, both backed by strong warranty terms.
Eclipse Warranty Overview
Eclipse Mechanism Warranty
20-Year Warranty: Our stainless steel mechanism is covered by an industry-leading 20-year warranty, ensuring long-term durability and reliability.*
UltraGard™ III Fabric Warranty
7-Year Warranty: The UltraGard™ III fabric comes with a 7-year warranty, including 3 years full coverage and 4 years pro-rated. This fabric is designed for exceptional resistance to UV light, chemicals, and mildew.*
Heat Sealed Webbing Warranty
7-Year Warranty: Our exclusive HEAT SEALED Webbing is covered by a 7-year warranty, including 3 years full coverage and 4 years pro-rated. This patented webbing process significantly enhances durability and performance.*
Electrical Motor Warranty
5-Year Warranty: The electrical motor, including protection against water damage, is covered by a 5-year warranty, providing reliable operation even in challenging conditions.*
*See full warranty for official details.
Salt Water Pool Compatibility
Coverstar warranties are valid for saltwater pools, offering the same level of protection and durability in corrosive environments. For more detailed information, please refer to our warranty sheets.
In order for your warranty to be valid, Coverstar Arizona must receive payment in full for your system.